T39-B05 Soldering Iron Tip Conical Shape R0.5 x 10
, , ,

T39-B05 Soldering Iron Tip Conical Shape R0.5 x 10

SKU: HT39-B05

Availability:

In stock

Hakko soldering iron tip used with the FX9701 / FX9702 soldering iron used with the FX971 and FX972 Soldering Stations
T39 Composite Tip design includes the sensor within the tip allowing for faster more accurate thermal adjustments and greater stability.

£16.26 Excl. VAT

In stock

A minimum sub total of £250.00 is required, You need an additional £250.00 to proceed through to the checkout.

For customers in the Republic of Ireland, please contact us for a quote including shipping and customs charges.

Request quote

This shape is All-round type which can be used from any direction and it is available for any works. Therefore it is not only accessible for the soldering beginners but also suitable for the experienced.

This page introduces three kinds of soldering work. Please try the tip shape showed bellow if in trouble such as bridging, faulty fillet formation, insufficient wetting, etc.

Soldering chip parts
Use it for soldering chip part.Put the tip to the land and drag the tip slowly while feeding solder.

Some IC is specified by manufacturer not to be touched electrode by tip end.

 

The other tip shapes are recommended.
Soldering chip parts

Drag soldering
Use it for drag soldering.Put the tip end to the leads and drag it slowly.

Apply flux to leads and land pads before soldering. It prevents the troubles such as solder bridge.

Check the right timing to feed solder.

The other tip shapes are recommended.
Drag soldering

Point soldering
Use it for point soldering.
1.Put the tip end to the land pad and the through-hole at one time to heat them.
2.Feed solder to form smooth fillet on the land pad.

The other tip shapes are recommended.
Point soldering

Categories: , , ,