Faster thermal transmission for superior performance at lower temperature and with lower wattage soldering irons. |
Three different Regular type: Rosin flux treated copper braid Unflux type: Untreated copper braid No clean type: Low residue flux treated copper braid Using ESD SAFE package |
Removal for thru-hole…
Removal for bridging…
Usage/Applications
Desoldering wire is used to remove solder from an elemental device or from patterns on a printed circuit board (PCB) from which surface-mounted devices such as BGA (ball grid array) have been removed.
Trick to remove solder well with the desoldering wire |
Wrong use of the desoldering wire may tear patterns from a PCB or damage discrete components. In order to prevent these problems, make sure to take the preventive measure below:
Preliminary soldering improves heat conductance. |
Press the desoldering wire with the soldering iron on the wire | |
Be careful not to press the soldering tip down for too long. Otherwise, the pattern will come off. | |
Remove the desoldering wire and soldering iron at the same time. |