, , , , , , , , ,

FX8302-01 Nitrogen High Power Soldering Iron

SKU: HFX8302-01

Hakko
Availability:

Available for order*


Nitrogen Compatible High powered 150W soldering iron with high heat capacity
Suitable for use with the FX-838 Station
High Temperature range 200 to 500°C
Best suited for soldering of power-supply boards, heat sinks and shield cases
Applicable also for multilayer boards with micro components
This Soldering Iron does NOT include a Tip (see tips tab)

£189.73 Excl. VAT

Available for order*

A minimum sub total of £250.00 is required, You need an additional £250.00 to proceed through to the checkout.

For customers in the Republic of Ireland, please contact us for a quote including shipping and customs charges.

Request quote

Note: Tips not included. Requires Nitrogen Source to function.

The N2 gas and preheating effect have achieved significant improvement in soldering work!
N2 soldering iron providing 150W high output

Preheating effect
The hot N2 gas is effective for preheating.

Preventing oxidation

Powerful thermal recovery
Can be used in combination with your existing high power soldering station, HAKKO FX-838.

N2 System
Can be used in combination with the HAKKO FX-780/FX-781 and HAKKO FX-791 to create an N2 System.

H K Wentworth - HAKKO UK and Ireland distributor

183(W)280(H)205(D)mm
*Reference dimensions

Combination Example

High Power 150W Soldering Iron for use with the FX-838 enjoys the various applications from large to fine components.

Great thermal recovery improves the soldering environment.(Refer to the graph bellow.)

It allows soldering at lower set temperatures.
It can shorten the soldering working time, which minimize concern about the influence of heat on components and tip life.(Refer to the graph bellow.)
It is suitable not only for high-power required working condition such as soldering multilayer boards or shield cases but for microsoldering.

What benefit can be taken by Low set temperature and Cut in Soldering Working Time

1.

They reduce the risk of the damage of heat-sensitive chips and workpieces.

2.

They diminish the oxidation of soldering tips.
As for soldering with Lead-free solder which has high melting point, setting temperature tends to be set higher than soldering with eutectic solder. It stimulates the oxidation of tips and results in the short tip life.

Why is the tip oxidize easily when using lead-free solder

Operate at Maximum Temperature of 500 Degrees.

It enables soldering power-supply boards easily because high power 150W hand piece can provide great thermal recovery.

High Power but Safety design of low voltage.

This unit has not only high power but also low output voltage (27V) , which is lower than the world safety output voltage of 30V.

Easy to replace tips.

H K Wentworth - HAKKO UK and Ireland distributor

Cartridge style Integrated heater makes thermal conductivity improve.
Available 20 different shape as replacement, some of which are suitable for fine components.

HAKKO FX-838 replacement Tip List (T20 series)

Temperature preset mode saves time and effort.

It allows you to input three frequently-used temperatures in advance and recall them with one push of a button.
It saves the troublesome setting condition, tailored to the tip-shape, component and work.

Combination of optional handpiece allows use of N2 system.

N2 system

Great thermal recovery

150W hand piece provides great thermal recovery, which allows soldering at lower set temperatures to!!minimize concern about the influence of heat on components and tip life.

H K Wentworth - HAKKO UK and Ireland distributor

High power saves the working time.

The high power shortens the working time.

H K Wentworth - HAKKO UK and Ireland distributor

– Test Condition

Test method

Solder at 5 points and measure the time until temperature of the workipiece reaches 250 degrees.

Board used

Bakelite board

Component

Terminal

Tip shape

Shape-1.6D

Temperature setting

340°C

Solder

Lead-free solder (Sn/Ag/Cu) 0.5

You may also like…

Thank you for visiting the only authorised wholesaler of Hakko products in the UK and Ireland. Please note: we have a minimum order value of £250 excluding shipping. Orders under this value will not be processed at checkout.
Dismiss